Here are add-ons which are useful for narrow aisle lift trucks:
Side shift: The side shift option allows the lateral movement of the load without having to move the truck. This allows loads to be accurately positioned.
Tilt mast: The optional tilt mast enables the forks to shift both forwards and backwards. This is perfect in situations where loads aren't entirely level. To be able to gain greater stability when transporting a truck that is loaded, the mast could be tilted back.
Extendable forks: The option of extendable forks helps the "reach" of the forklift to extend for stacking pallets one in front of the other, referred to as "double-deep" loading.
Operator platforms: Operator platforms allow some NA forklifts to lower and raise the operator while the forks are being raised or lowered. This provides utmost visibility and control when dealing with cargo at heights of 6 to 9 meters.
Forklift on a Ramp
Forklift operators should be properly taught on the equipment. They are required to be assessed and qualified or certified. It is very vital for anybody using a forklift to be very educated about safety concerns and rules. Operators need to understand how to adjust in situations where the load weight changes the center of gravity or on uneven surfaces. Safety guidelines include safely using a forklift on a ramp, that is a frequent occurrence because the driver will normally have to drive up and down ramps to unload and load containers.
Guidelines for Utilizing a Lift Truck on a Ramp
1 Drive slowly while approaching a ramp and while driving up and down the ramp. The possibility of mishaps is higher when driving fast because this can upset the equipment's center of gravity.
2 When not carrying a load, drive the lift truck in reverse while moving up an incline on a ramp.
3 Drive forward while moving down an incline on the ramp with no load.
4 Tilt the forks slightly back to shift the center of the load to the machine's front, when moving down or up a ramp when carrying a load.
5 Drive forward up a ramp while carrying a load in order to make the load more steady.